View RP03-0505SE_530062.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Features
Regulated Converters

2:1 Wide Input Voltage Range 3 Watts Regulated Output Power 1.6kVDC Isolation Also Available with Isolated Outputs, Output 1/Output 2 (DS) Isolation Low Profile, 10.2 mm Height Over Current Protection Five-Sided Shield No Derating to 71C Non-Conductive Black Plastic Standard DIP24 and SMD-Pinning UL 1950 Component Recognized High Efficiency to 80%
POWERLINE
DC/DC-Converter
RP03-S_DE (DE/DS) Series
3 Watt DIP24 & SMD, Single & Dual Isolated Output
Selection Guide 5V, 12V, 24V and 48V Input Types
Part Number DIP24 (SMD) RP03-053.3SE** RP03-0505SE** RP03-0512SE** RP03-0515SE** RP03-123.3SE** RP03-1205SE** RP03-1212SE** RP03-1215SE** RP03-243.3SE** RP03-2405SE** RP03-2412SE** RP03-2415SE** RP03-483.3SE** RP03-4805SE** RP03-4812SE** RP03-4815SE** RP03-0505DE** RP03-0512DE** RP03-0515DE** RP03-1205DE** RP03-1212DE** RP03-1215DE** RP03-2405DE** RP03-2412DE** RP03-2415DE** RP03-4805DE** RP03-4812DE** RP03-4815DE** Input Range VDC 4.5-6 4.5-6 4.5-6 4.5-6 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 4.5-6 4.5-6 4.5-6 9-18 9-18 9-18 18-36 18-36 18-36 36-75 36-75 36-75 Output Voltage VDC 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 5 12 15 5 12 15 5 12 15 5 12 15 Output Current mA 600 600 250 200 600 600 250 200 600 600 250 200 600 600 250 200 300 125 100 300 125 100 300 125 100 300 125 100 Input (4) Current mA 638 910 845 845 252 352 334 334 126 174 165 165 61 88 84 84 870 845 870 357 334 334 174 167 167 86 84 84 Efficiency(5) % 66 70 75 75 70 75 79 79 70 76 80 80 72 75 79 79 73 75 73 74 79 79 76 79 79 77 79 79 Capacitive(6) Load max. F 2200 1000 170 110 2200 1000 170 100 2200 1000 170 100 2200 1000 170 100 500 96 47 500 96 47 500 96 47 500 96 47
** add Suffix SMD for SMD package
Description
The E-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all Telecom and safety applications where approved isolation is required. They also meet UL 1950 and CSA 950 standards. 182 April-2005 www.recom-international.com
POWERLINE
DC/DC-Converter
Selection Guide 5V, 12V, 24V and 48V Input Types
Part Number for DE/DS(V1 & V2) DIP24 (SMD) RP03-0505DE/DS** RP03-0512DE/DS** RP03-0515DE/DS** RP03-1205DE/DS** RP03-1212DE/DS** RP03-1215DE/DS** RP03-2405DE/DS** RP03-2412DE/DS** RP03-2415DE/DS** RP03-4805DE/DS** RP03-4812DE/DS** RP03-4815DE/DS** Input Range VDC 4.5-6 4.5-6 4.5-6 9-18 9-18 9-18 18-36 18-36 18-36 36-75 36-75 36-75 Output Voltage V1 & V2 VDC 5/5 12 / 12 15 / 15 5/5 12 / 12 15 / 15 5/5 12 / 12 15 / 15 5/5 12 / 12 15 / 15 Output Current V1 & V2 mA 300 / 300 125 / 125 100 / 100 300 / 300 125 / 125 100 / 100 300 / 300 125 / 125 100 / 100 300 / 300 125 / 125 100 / 100 Input (4) Current mA 870 845 870 357 334 334 174 167 167 86 84 84 Efficiency(5)
RP03-S_DE (DE/DS) Series
% 73 75 73 74 79 78 76 79 79 77 79 79 Capacitive(6) Load max. V1 & V2 F 500 / 500 96 / 96 47 / 47 500 / 500 96 / 96 47 / 47 500 / 500 96 / 96 47 / 47 500 / 500 96 / 96 47 / 47
** add Suffix SMD for SMD package
Derating-Graph (Ambient Temperature)
RP03-4805SE
125 100 75 Output Power (%) 50 25 0 -25 -10 0 50 60 70 80 90 100
Natural Convection
Ambient Temperature Range (C) 71
Derating graphes are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at
Specifications (typical at nominal input and 25C unless otherwise noted)
Input Voltage Range 5V nominal input 12V nominal input 24V nominal input 48V nominal input 4.5-6VDC 9-18VDC 18-36VDC 36-75VDC Pi Type 5V Input 12V Input 24V Input 48V Input 15VDC 36VDC 50VDC 100VDC continued on next page www.recom-international.com April-2005 183
Input Filter Input Surge Voltage (100 ms max.)
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25C unless otherwise noted)
Input Reflected Ripple (nominal Vin and full load) Start Up Time (nominal Vin and constant resistor load) Output Power Output Voltage Accuracy (full Load and nominal Vin) Minimum Load (see Note 1) Line Regulation (LL-HL at full load) DS Load Regulation (25% to 100% FL) Single Dual DS
RP03-S_DE (DE/DS) Series
120mAp-p 30ms typ. 3W max. 2% 10% of FL 0.2% 0.5% 0.2% 2% 0.5% 5% 3.3V, 5V others 75mVp-p 1%/p-p of Vout max. 0.02%/C, max. 500S 180% typ Continuous, automatic recovery see Selection Guide" table In to out Output to Output /DS type 1.600VDC min. 500VDC min. 109 min. 300pF max. 100kHz min. UL 1950, EN60950 -25C to +71C -55C to +105C 10-55Hz, 2G, 30 Min. along X, Y and Z 5% to 95% RH Non-conductive black plastic Non-conductive black plastic Epoxy (UL94-V0) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 DIP SMD DIP SMD Level A Level A Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 14g 15g 31.8 x 20.3 x 10.2mm 32.0 x 20.3 x 10.9mm 3.706 x 106 Hours
Cross Regulation (asymmetrical load 25%/100% FL) Ripple and Noise (20MHz bandwith)
Temperature Coefficient Transient Response (25% load step change) Over Load Protection (% of full load at nominal Vin) Short Circuit Protection Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Operating Frequency Approved to Safety Standards Operating Temperature Range Storage Temperature Range Vibration Relative Humidity Case Material Base Material Potting Material Conducted Emissions Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity Weight Dimensions MTBF (see note 2)
184
April-2005
www.recom-international.com
POWERLINE
DC/DC-Converter
Notes :
RP03-S_DE (DE/DS) Series
1. The RP03 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). 3. Should an O/O isolation be required, please order the converter with the following part number: RP03-XXXXDE/DS. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. See application notes for EMI-filtering.
Notes :
DIP24 Package Style
31.80 20.30
Pin Connections
3rd angle projection
10.20 3.8 2 22.90 2.54 15.20
Pin #
Single
Dual + V in - V out Com Com + V out - V in - V in + V out Com Com - V out + V in
0.25 x 0.50 Rectangular Pin 123 Bottom View 24 23 22 15 14 13 10 11 12
1 + V in 2 NC 3 NC 10 - V out 11 + V out 12 - V in 13 - V in 14 + V out 15 - V out 22 NC 23 NC 24 + V in NC = No Connection
Dual Separate + V in - V1 out + V1 out - V2 out + V2 out - V in - V in + V2 out - V2 out + V1 out - V1 out + V in
Pin Pitch Tolerance 0.35 mm
SMD Package Style
32.00 31.40 20.30
SMD Package Style
Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin.
Pin Connections
11.20
10.90 3.81 6.35 21.30 25.40
Pin #
Single
Dual + V in - V out Com Com + V out - V in - V in + V out Com Com - V out + V in NC
2.54
Pin area 0.1 x 0.50
12345
0.50
9 10 11 12
2.54
1.60 2.40
23.40
Bottom View
24 23 22 21 20 16 15 14 13
26.54 24.14
1
Top View
1 + V in 2 NC 3 NC 10 - V out 11 + V out 12 - V in 13 - V in 14 + V out 15 - V out 22 NC 23 NC 24 + V in Others NC NC = No Connection
Dual Separate + V in - V1 out + V1 out - V2 out + V2 out - V in - V in + V2 out - V2 out + V1 out - V1 out + V in NC
Pin Pitch Tolerance 0.35 mm
11 x 2.54
27.94
www.recom-international.com
April-2005
185

▲Up To Search▲

Price & Availability of RP03-0505SE

	To Download RP03-0505SE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .